Model Name
|
Winner2000ZDE
|
Winner2000ZD(3 Gears)
|
Standard
|
ISO13320-1:1999, GB/T19077.1-2008, Q/JWN001-2009
|
Measuring Range
|
0.1-300μm
|
0.1-40μm /0.6-120μm/1-300μm
|
Channels Number
|
39
|
32×3
|
Accuracy
|
<1% (National Standard Sample D50 )
|
Repeatability
|
<1% (National Standard Sample D50 )
|
Light source
|
High performance He-Ne Laser (λ= 632.8nm, P>2MW)
|
Dispersion
Method
|
Ultrasonic
|
Frequency:40KHz Power:35W, Time: ≥1S
|
Stir
|
Revolutions Speed: 0-300RPM (Adjustable)
|
Circulate
|
Rated Flow:8L/min Rated Power:10W
|
Sample Pool
|
Volume:350mL
|
Micro-
Sample Pool
|
Volume: 10mL ( Optional)
|
Operation Mode
|
Full automatic software control
|
Optical Calibration System
|
Full automatic
|
Test Speed
|
<2mins for each time
|
Volume
|
L88cm×W39cm×H46cm
|
Net Weight
|
41Kg
|
Warranty
|
1 year
|
Main Features:
1) Advanced design of light path:
A patented technique of Fourier transform of converging light released the scattered light at large-scattering
angles from the restriction of the aperture of the Fourier lens. The focal length is reduced to enhance the
resolution of the instrument.
2) Built-in dispersing units:
We carefully aligned the stirring set-up, the ultrasonic dispersing unit and the sample circulation pipes, and
fixed them inside the instrument. Such a builtin design effectively prevents the inhomogeneous dispersion and
sedimentation of big particles, which can be observed in the designs that these dispersing units are separated from the instruments, where the sample circulation pipes are therefore too long, The sample will be sufficiently
dispersed.
3) Unconstrained fitting techniques:
The particle analysis software uses a unique unconstrained data fitting technique that we developed to obtain data
of unknown size distribution, this is particularly important for researchers.
4) Micro sample chamber (optional):
The capacity of the sample chamber is as small as only 10ml. This helps with measuring expensive/precious samples,
or samples difficult to be dispersed within medium.
5) Modern measurement control:
Users can perform all measurement procedures by simply operating on the PC and have ideal results in a very short time.
6) Friendly Operation:
Manual mode and the automatic mode, freely choose, to measure according to the sample features. In some conditions
(e.g. the sample have unknown features or there are special requirements for the measurements), users can make a test
measurement in the manual mode first, and after having an idea of the sample features and the measurement conditions,
measure the samples in the automatic mode.
7) Fully automatic light path alignment:
A precise four phase hybrid stepping motor automatically aligns the optical path and can adjust it at any moment. This
releases users from manual adjusting the optical path and improved accuracy and stability of the measurement results.
8) Quick measurements:
set “ automatic” mode, all operation procedures are performed automatically,automatic water supply, Automatic ultrasonic
sample, stirring, circulation,background testing, sample testing,analysis , draining and cleaning, which significantly reduces
the time for measurements, the full process only take 2 minutes.
9) Data analysis:
Errors in the data are rejected and the measurement results are automatically processed. Manual data processing is
not necessary and the output is more standard.
Software Function:
1) Analysis Mode
Free Distribution, R-R Distribution, Logarithm Normal Distribution, Mesh number classification etc. It meet different demands
of particle size statistic in different industries.
2) Statistic Method
Volume Distribution, Quantity Distribution
3) Statistic Comparison
Statistic Several Testing Results to compare and analyze
Get difference by compare test result of different batches of samples, samples before and after processing, and different time.
Have great practical significance to industrial raw materials quality control
4)User-defined Analysis
Figure out percentage according to the particle size
Figure out particle size according to the percentage
Figure out percentage according to the particle size range
Meet demands of representation of particle test in different industries.
5)Test Report
Word, Excel,Photo( Bmp), Text etc.
6) Multi-language Support
Chinese&English (Others are available)
7) Intelligent Operation Mode
Automatically control water inflow, dispersion,test and analysis.
Better Repeatability after remove human-factor
Application:
1. Nonmetallic powders such as calcium carbonate, talcum powder, kaolin, zirconium silicate, wollastonite, graphite, silica
powder, tourmaline, mica, barite, plaster, bentonite, diamond, quartz, diatomite, feldspar, calamite,clay, garnet, vermiculite,
Titanium white power, etc.
2. Metallic powder such as aluminum powder, iron powder, magnesium powder, molybdenum powder, copper powder, zinc
powder, other rare metal power and varied alloy powder, etc.
3. Pharmaceutical, agricultural pesticide, grinding particle, foodstuff, scientific research, teaching, cement, ceramic, glass,
chemical industry, military industry, soil, pigment, oil exploration, geological analysis, river silt and electronic particle, etc.